YAMAHA RHINO REAR CV BOOT GUARDS INSTALLATION

Rhino Rear UP TO 2007 CV Guard Installation Instructions
1-020
Remove product from packaging.
Hardware consists of:
• 4ea. ¼-20 x 3/4” BHCS SS
• 4ea. ¼-20 NYLOCK NUT
1. Jack rear of vehicle to release any tension from stabilizer bar.
2. Remove stabilizer from a-arm using a 14 & 17 mm wrenches .
3. Place guard in position.
4. Re-attach the stabilizer bar through guard and a-arm.
5. Insert ¼” bolts into two rear holes passing through a-arm.
6. Thumb the lock nut on each bolt.
7. Tighten both stabilizer bar and rear bolts.
8. Enjoy!!!!!
If you have any questions, please call 423-569-3478 or visit http://www.dirtperformance.net/ , e-mail question to
producttech@dirtperformance.net.